Materials:
4 kg (9 lb) suet (tallow)
350 g (12 oz) lye
750 ml (3 C) water
500 ml (2 C) lemon juice
7.5 ml (.25 oz) fragrance
gloves
wooden spoon
ventilated work area
molds/glass baking dishes
1. if you are using a pure fat, such as coconut oil or olive oil, you can skip to step 5. Coconut oil yields a soft, quick-lathering soap. Olive oil and other vegetable cooking oils yield a soft soap that never completely hardens.
2. Render the tallow by cutting it into chunks, placing it into the large pot, covering it, and heating on medium heat until it is melted. Stir occassionally.
3. Cool the fat to below the boiling point of water. Add a volume of water equal to that of the fat. Bring the mixture to a boil. Cover and remove from heat. Let sit overnight.
4.Remove the fat from the pot. Discard non-fat gunk (scrape it off of the bottom of the fat) and any liquid.
5. Measure 2.75 kg rendered fat. Cut the fat into tennis-ball size chunks and place the pieces into a large bowl.
6. Set up all of your materials. Ventilate the area (or work outside), put on safety gear, and open all containers.
7. Now Make soap = Pour the water into a large glass or ceramic bowl (not metal). Carefully pour the lye into the bowl and mix the water and lye with the wooden spoon.
8.The reaction between water and lye gives off heat (is exothermic) and vapors that you should avoid breathing. The spoon will be somewhat degraded by the lye.
9.Once the lye is dissolved by the water, start adding the chunks of fat, a bit at a time. Keep stirring until the fat is melted. If necessary, add heat (put on a low burner with ventilation).
10. Stir in the lemon juice and fragrance oil (optional). Once the soap is well-mixed, pour it into molds. If you use glass baking dishes for molds, you can cut the soap into bars after it has become firmer (not hard).
11. The soap will harden in approximately an hour.
12. You may wrap the finished soap in clean cotton rags. It can be stored for 3-6 months in a cool, well-ventilated location.
13.Wear gloves when washing your equipment, as their may be some unreacted lye remaining. Wash in very hot water to help melt away the residue.
